Assemble y our printer – LulzBot TAZ Pro S 3D Printer User Manual
Page 15
LulzBot TAZ Pro S
| 13
3
Assemble Y
our Printer
3.9
Align the end of the Y-axis cable chain under the modular print bed as shown. Once in place, secure the
cable chain to the bed using the included 4mm hex key and the
captive inset screw
on the modular print bed.
Turn the 4mm hex key counter-clockwise until you feel the threads seat (to prevent stripping the threads),
then while holding the cable chain level, turn the 4mm hex key clockwise to screw on the cable chain.
Captive Inset Screw