RF-Links Military-Grade 20W High-Power Amplifier (20 MHz-6 GHz) - Manual

ZHM20-6000/20
MIL Grade High Power Amplifier
This is a High power, super broadband RF amplifier that operates from 20
MHz to 6 GHz, ideal for broadband military platforms as well as
commercial applications because it is robust and offers high power over
an extremely large bandwidth with decent power added efficiency. It was
designed for broad band communication systems platforms. This amplifier
has a typical saturated output power of 15-20 watts at room temperature.
Noise figure at room temperature is 8.0 dB typical. It offers a typical gain
of 53.5 dB with a typical gain flatness of ± 4.5 dB..
• Gallium Nitride Broadband Power Amplifier
• Operation from 20 MHz to 6.0 GHz min
• Small Signal Gain 53.5 dB typical
• 15-20 Watts PSat typical
Electrical Specifications
PARAMETER MIN. TYP. MAX UNITS SYMBOL
Operating Frequency 20 6000 MHz BW
Output Power CW 15 20 22 Watt P
SAT
Small Signal Gain 51.5 54 56 dB G
1dB
Input Power for Rated P
OUT
0 5 dBm P
IN
Switching Speed, 1kHz TTL @ P
IN
= 0dBm 1 uSec T
ON/OFF
Small Signal Gain Flatness ±2.0 ±4.5 dB  G
Third Order Intercept Point
2-Tones, 33dBm/Tone.,
 = 100 KHz
+48 dBm IP3
Input Return Loss -10 dB S
11
Noise Figure@ minimum attenuation 8 dB NF
Harmonics @ Rated P
1dB
= 10W -20 -15 dBc H
Spurious Signals -70 -60 dBc Spur
Operating Voltage 26 28 32 Volt Vdc
Current consumption 2.7 Amp I
DC
Stock No.AMP4759 RF-LINKS - PO Box 6388, Tucson, AZ 85737 USA
Copyright © 2001-2014 RF-LINKS
28-01-2014 Tel : 323 386 4705 Fax : 775 261 8168