RF-Links Wideband UHF 100W Amplifier (30-550 MHz) - Manual

ZHM0360-100
HIGH POWER AMPLIFIER
30 MHz – 550 MHz
This is a high power broadband amplifier for
labs or testing purposes. This amplifier is
excellent for VHF- UHF band 30 MHz- 550
MHz. The gain is over 49 dB. The maximum
power is 100 W. Minimum required driving
power is only 1 mW - 5 mW. This amplifier is
recommended for testing, labs, Space
research, Mil applications etc.
Dimensions: 7.56 " X 3.15 " X 0.87 ".
Technical Specifications
Frequency range 30..550 MHz
Input power for P3dB min. 3 dBm
Maximum input power +8 dBm
Output power P3dB typ. 50 dBm, min. 49 dBm
typ. 100 W, min. 80 W (CW)
Output power COFDM (1) typ. 40 dBm, min. 38.4 dBm
typ. 10 W, min. 7 W
Gain (small signal) typ. 49 dB, min. 47 dB
Gain flatness (small signal) typ. +/- 1.5 dB (ALC not aktive)
Harmonic rejection min. 18 dB @ 47 dBm
IM3 (2) typ. 25 dBc @ 47 dBm PEP
Efficiency typ. 30 % @ 47 dBm (CW)
Input return loss (S11) min. 10 dB
ON voltage +9 ... 14 V DC
Supply voltage +28 V DC
Quiescent current typ. 4.4 A
Current consumption @ P3dB max. 8.5 A
Operating case temp. range -20 ... +55 °C
VSWR of load max. 1.8 : 1
Input connector / impedance SMA-female / 50 ohms
Output connector / impedance N-female / 50 ohms
Case Metal-aluminum
Dimensions (in) 7.56” x 3.15” x 0.87”
Weight 580 g (typ.)
(1) Measured with QAM 64, single carrier, EVM: 2%
(2) Measured 2-tone, frequency spacing: 1 MHz
Copyright © 2001-2014 RF-LINKS