RF-Links Wideband 1W Microwave Amplifier (40 MHz-10 GHz) User Manual
Zhm 10g/1, Special microwave wideband amplifier dc - 10 ghz

ZHM 10G/1
SPECIAL MICROWAVE
WIDEBAND AMPLIFIER DC - 10 GHz
Export restricted item
This is a medium power broadband amplifier for labs or testing purposes. This amplifier is excellent for
SUHF band DC - 10 GHz. The gain is over 40 dB. The maximum power is 1 W. Minimum required driving
power is only 1 mW. This amplifier is recommended for testing, labs, Space research, Mil applications etc.
This is a medium power, super broadband RF amplifier that operates from 40 MHz to 1 GHz,
ideal for
broadband military platforms as well as commercial applications because it is robust and offers high power
over an extremely large bandwidth with decent power added efficiency.
It was designed for broad band
jamming and communication systems platforms.
It is packaged in a modular housing that is approximately
2.5" (width) by 3.25" (long) by 0.8" (height).
This amplifier has a typical saturated output power of 5-10 watts at
room temperature
.
Noise figure at room temperature is 10.0 dB typical.
It offers a typical gain of 50 dB with a typical gain
flatness of ± 4.0 dB. The power and gain flatness across the band is very flat for the bandwidth. Input VSWR
is
2.0:1 typical. This amplifier operates from -40C to +85C base plate temperature.
FOR US GOVERNMENT AGENCIES ONLY!
Typical Applications
Telecom Infrastructure
Microwave Radio & VSAT
Military
Space
Test Instrumentation
Fiber Optics
Features
P1dB Output Power: +27 dBm
Gain: 22 dB
Output IP3: +37 dBm
Supply Voltage: +12V @ 300 mA
50 Ohm Matched Input/Output
32 Lead 5x5mm Lead SMT Package: 25mm2