RF-Links Wideband 25W Microwave Amplifier (2300-2500 MHz) - Manual

ZHM2325-20B
HIGH POWER AMPLIFIER
2300 MHz – 2500 MHz
This is a high power broadband amplifier for
labs or testing purposes. This amplifier is
excellent for 2300 MHz- 2500 MHz. The gain is
over 33 dB. The maximum power is 25 W.
Minimum required driving power is only 15
mW. This amplifier is recommended for
testing, labs, Space research, Mil applications
etc.
Dimensions: 7.56 " X 3.15 " X 0.87 ".
Technical Specifications
Frequency range 2300..2500 MHz
Input power for P1dB typ. 15 dBm
typ. +12 dBm
Maximum input power +17.5 dBm
Output power P1dB typ. 44 dBm, min. 43 dBm (CW)
typ. 25 W, min. 20 W (CW)
Output power COFDM (1) typ. 39 dBm, min. 37.7 dBm
typ. 8 W, min. 6 W
Gain (small signal) typ. 33 dB, min. 30 dB
Gain flatness (small signal) typ. +/-0.5 dB
Harmonic rejection typ. 60 dB, min. 55 dB @ 43 dBm
IM3 (2) min. 40 dBc @ 40 dBm PEP (2)
Efficiency min. 20 % @ 43 dBm (CW)
Input return loss (S11) min. 13 dB
ON voltage +5 ... 14 V DC
Supply voltage +11 ... 14 V DC
Quiescent current typ. 7.3 A
Current consumption typ. 7.5 A
Forward detection yes (diode detector)
Reflected power detection yes (diode detector)
Operating case temp. range -20 ... +55 °C
Input connector / impedance N-female / 50 ohms
Output connector / impedance N-female, 50 ohms
Case milled aluminium
Dimensions (mm) 7.56 " X 3.15 " X 0.87 "
Weight 550 g (typ.)
(1) Measured with QAM 64, single carrier, EVM: 2%
(2) Measured 2-tone, frequency spacing: 1 MHz
Copyright © 2001-2014 RF-LINKS