RF-Links Wideband 25W Microwave Amplifier (2300-2500 MHz) - Manual

ZHM2325-20A
HIGH POWER AMPLIFIER
2300 MHz – 2500 MHz
This is a high power broadband amplifier for
labs or testing purposes. This amplifier is
excellent for 2300 MHz- 2500 MHz. The gain is
over 55 dB. The maximum power is 25 W.
Minimum required driving power is only -8 mW.
This amplifier is recommended for testing,
labs, Space research, Mil applications etc.
Dimensions: 7.56 " X 3.15 " X 0.87 ".
Technical Specifications
Frequency range 2300 - 2500 MHz
Input power for P1dB typ. -9 dBm
Maximum input power -5 dBm
Output power P1dB typ. 43.8 dBm, min. 43 dBm (CW)
typ. 24 W, min. 20 W (CW)
Output power P3dB min. 44 dBm (CW)
min. 25 W (CW)
Output power COFDM (1) min. 38.4 dBm (1)
min. 7 W
Gain (small signal) typ. 55 dB, min. 53 dB
Gain flatness (small signal) typ. +/- 1 dB
Harmonic rejection typ. 60 dB, min. 55 dB @ 43 dBm
IM3 (2) min. 40 dBc @ 40 dBm PEP (2)
Efficiency min. 20 % @ 43 dBm (CW)
Input return loss (S11) min. 15 dB
ON voltage +5 ... 14 V DC
Supply voltage +11 ... 14 V DC
Current consumption @ P1dB typ. 8 A
Forward detection yes (diode detector)
Reflected power detection yes (diode detector)
Operating case temp. range -20 ... +55 °C
Input connector / impedance N-female / 50 ohms
Output connector / impedance N-female, 50 ohms
Case milled aluminium
Dimensions (mm) 7.56 " X 3.15 " X 0.87 ".
Weight 1000 g (typ.)