RF-Links Wideband High-Power 250W Microwave Amplifier (2400-2500 MHz) - Manual

ZHM2425-250
HIGH POWER AMPLIFIER
2400 MHz – 2500 MHz
This is a high power broadband amplifier for
labs or testing purposes. This amplifier is
excellent for 2400 MHz- 2500 MHz. The gain is
over 30 dB. The maximum power is 250 W.
Minimum required driving power is 350 mW.
This amplifier is recommended for testing,
labs, Space research, Mil applications etc.
Dimensions: 6.0 " X 4.0 " X 2.0 ".
Technical Specifications
Frequency range 2400- 2500 MHz
Input power for P1dB typ. 24 dBm, max. 28 dBm
Maximum input power 34.7 dBm
Output power P1dB typ. 54 dBm, min. 53 dBm (CW)
typ. 250 W, min. 200 W (CW)
Output power P3dB min. 54.7 dBm (CW)
min. 300 W (CW)
Output power COFDM (1) min. 47 dBm
min. 50 W
Gain (small signal) typ. 30 dB
Gain flatness (small signal) typ. +/- 1.5 dB
Harmonic rejection typ. 40 dB @ 54 dBm
Over temperature protection yes
IM3 (2) typ. 26 dBc @ 54 dBm PEP
Efficiency typ. 35 %
Input return loss (S11) typ. 10 dB
ON voltage switched to ground
Supply voltage 30 V DC
Quiescent current typ. 6,5 A
Current consumption max. 50 A
Forward detection yes (diode detector)
VSWR of load max. 1.8 : 1
Operating case temp. range -20 ... +55 °C
Input connector / impedance SMA-female / 50 ohms