RF-Links Wideband Microwave 20W Amplifier (30-2300 MHz) - Manual

ZHM03230-20
HIGH POWER AMPLIFIER
30 MHz – 2300 MHz
This is a high power broadband amplifier for
labs or testing purposes. This amplifier is
excellent for VHF- UHF band 30 MHz- 2300
MHz. The gain is over 43 dB. The maximum
power is 20 W. Minimum required driving
power is only 8 mW. This amplifier is
recommended for testing, labs, Space
research, Mil applications etc.
Dimensions: 6.0 " X 4.0 " X 2.0 ".
Technical Specifications
Frequency range 30..2300 MHz
Input power for P3dB typ. 2 dBm, max. 4 dBm
Maximum input power 5 dBm
Output power P3dB typ. 43 dBm, min. 41.7 dBm
typ. 20 W, min. 15 W
Gain (small signal) typ. 43 dB, min. 40 dB
IM3 (1) typ. 28 dBc @ 40 dBm PEP
Efficiency typ. 20% @ 10 W (CW)
Input return loss (S11) min. 10 dB
Supply voltage +28 V DC
Quiescent current typ. 950 mA
Current consumption max. 3.2 A
Operating case temp. range -20 ... +55 °C
VSWR of load max. 1.8 : 1
Input connector / impedance SMA-female / 50 ohms
Output connector / impedance SMA-female, 50 ohms
Case aluminum
Dimensions (mm) 6.0” X 4.0” X 2.0”
Weight 600 g (typ.)
(1) Measured 2-tone, frequency spacing: 1 MHz
Copyright © 2001-2014 RF-LINKS