RF-Links Wideband Microwave High-Power 150W Amplifier (700-2200 MHz) - Manual

ZHM0722-150
HIGH POWER AMPLIFIER
698 MHz – 2200 MHz
This is a high power broadband amplifier for
labs or testing purposes. This amplifier is
excellent for VHF- UHF band 700 MHz- 2200
MHz. The gain is over 66 dB. The maximum
power is 150 W. Minimum required driving
power is only -5 mW. This amplifier is
recommended for testing, labs, Space
research, Mil applications etc.
Dimensions: 6.0 " X 4.0 " X 2.0 ".
Technical Specifications
Frequency range 700 - 2200 MHz
Input power for P1dB max. -5 dBm
Maximum input power +10 dBm
Output power P3dB typ. 51.7 dBm, min. 51.1 dBm (CW)
typ. 150 W, min. 130 W (CW)
Gain (small signal) typ. 66, min. 60 dB
Gain flatness (small signal) typ. +/- 3 dB
IM3 (1) typ. 22 dBc @ 51.7 dBm PEP
Efficiency typ. 25 % @ 51.7 dBm PEP
Input return loss (S11) min. 10 dB
ON voltage +5 V DC
Supply voltage +40 ... 43 V DC
Quiescent current max. 4 A
Current consumption max. 20 A
Forward detection yes (diode detector)
Reflected power detection yes (diode detector)
Operating case temp. range -20 ... +55 °C
Input connector / impedance N-female / 50 ohms
Output connector / impedance N-female / 50 ohms
Case milled aluminium
Dimensions (mm) 330 x 188 x 25
Weight 1200 g (typ.)
(1) Measured 2-tone, frequency spacing: 1 MHz
Copyright © 2001-2014 RF-LINKS