RF-Links High-Gain Amplifier for Receivers (900 MHz) User Manual

RF-Links Accessories for electrical

AMP-900/23M

HIGH GAIN AMPLIFIER

FOR 900 MHz RECEIVERS

This is an excellent amplifier for any 900 MHz
receiver. This low noise amplifier will give an extra 23
dB gain in 900 MHz band. Also it has a Band pass
filter for 900 MHz band to cut all undesired
frequencies! It will increase a gain of your receiver
without adding large Yagi antennas. You can connect
any 900 MHz antenna to this amplifier. The output
connector is a BNC type. The power supply is
included.

Technical Specifications

Operating Frequency:

900 MHz- 928 MHz

DC Voltage:

9 V – 12 V

Minimum required voltage:

9 V

Battery power:

9 -12 V

Noise factor:

<4 dB

Maximum range:

N/A

Current Consumption:

35 mA / 9 V

Antenna:

N/A

Antenna Connector:

SMA

Impedance:

50 ohms

Temperature Range:

-40 +75* C

Dimensions:

2.8”x 0.75” x 1.5”

Weight:

50 grams

Band-pass filter:

Built-in

Protection: Reverse

polarity

See also other documents in the category RF-Links Accessories for electrical: