RF-Links Wideband 25W Microwave Amplifier (2300-2400 MHz) - Manual

ZHM2324-25
HIGH POWER AMPLIFIER
2300 MHz – 2400 MHz
This is a high power broadband amplifier for
labs or testing purposes. This amplifier is
excellent for 2300 MHz- 2400 MHz. The gain is
over 25 dB. The maximum power is 25 W.
Minimum required driving power is 50 mW.
This amplifier is recommended for testing,
labs, Space research, Mil applications etc.
Dimensions: 7.56 " X 3.15 " X 0.87 ".
Technical Specifications
Frequency range 2300..2400 MHz
Input power for P1dB min. 18 dBm
Maximum input power +21,7 dBm
Output power P1dB typ. 44 dBm, min. 43.6 dBm
typ. 25 W, min. 23 W
Output power P3dB typ. 44.3 dBm, min. 44 dBm
Output power COFDM (1) min. 38.4 dBm (1)
min. 7 W
Gain (small signal) min. 25 dB
Gain flatness (small signal) typ. +/- 1 dB
Harmonic rejection min. 35 dB @ 43 dBm
IM3 (2) min. 33 dBc @ 40 dBm PEP
Efficiency min. 33 dB @ 43 dBm
Input return loss (S11) min. 10 dB
ON voltage +5 ... 14 V DC
Supply voltage +12 ... 14 V DC
Quiescent current typ. 1.3 A
Current consumption @ P1dB typ. 4 A
Forward detection yes (diode detector)
VSWR of load max. 1.8 : 1
Operating case temp. range -20 ... +55 °C
Input connector / impedance SMA-female / 50 ohms
Output connector / impedance SMA-female, 50 ohms
Case milled aluminium
Dimensions (mm) 7.56” X 3.15” X 0.87”
Weight 500 g (typ.)