beautypg.com

RF-Links LD-MOS Broadcast UHF Power Amplifier (470-862 MHz) User Manual

Zd-500w, Ld-mos broadcast uhf power amplifier, Electrical data mechanical data and interfaces

background image

ZD-500W

Voltage Supply

220Vac +15% -20% nominal
100-240Vac 50-60Hz for Pout up to 150Wrms
176-240Vac 50-60Hz for Pout over 150Wrms

Power Consumption

1500W @500W Ps Black Field @650MHz (typ.)
850W @150Wrms DVB-T @ 650MHz (typ.)

Current Consumption

7.5 A max @ 220 V PF > 0.97 analog application

Operating Temperature

0 to +45 °C

Humidity

Up to 90% (non condensing)

Gain Stability

0 to 45 deg. +/-0.5dB

1

Gain

56dB nom. ±2dB (fine ADJ available)

Power Out (@1dB compression)

Min. 600W (Typ. 700W)

Input Return Loss

Min. -16dB (Typ. -20dB)

Output Return Loss

Min. -18dB (Typ. –22dB)

Load Mismatch
(CW 500W F

0

860MHz VSWR=2:1) all phase angle

No degradation

P

out

Common Amplif.

550W Ps IMD < -46dB Red Field (without precorrection)

P

out

DVB-T

150Wrms shoulder < -36dBc (with precorrection)

DTV (8 VSB)

275Wrms

P

out

PEP

700W IMD < -27 dBc

Dimensions

19” 3HU std 600mm depth

2

Weight

21 Kg.

RF in

N connector rear panel

RF out

7/16” connector rear panel

RF mon

SMA connector rear panel

RS232

D 9 poles front and rear panel

RS485

D 9 poles rear panel

Local Enable

Switch front panel Two-pole connector rear panel




LD-MOS BROADCAST

UHF POWER AMPLIFIER

ZD-500W is a full LD-MOS Broadcast Power Amplifier designed
for both digital and analog applications. The unit is the state of the
art in terms of easy assembly, reliability and performances. The
complete unit can assure the compliance to all relevant
international standards.

Full LD-MOS Power Amplifier

500Wps Out

150Wrms Out DVB-T

DTV (8 VSB): 275Wrms

BroadBand (470-862 MHz)

Designed for SKD sales

Internal cabling free

Easy maintenance without special tools

RS232-RS485 interface

Control software included

Extremely strong mechanical structure

This picture is a mere example, it does not bind the provided product

Electrical Data

Mechanical data and Interfaces

1

WARM UP: To achieve the stability vs temperature correct value when the equipment is cold, please

wait 30 minutes at least after switching on.

2

See pag. 4

Copyright

©

2001-2014 RF-LINKS

This manual is related to the following products: