RF-Links Military-Grade 10W High-Power Amplifier (20 MHz-6 GHz) User Manual
Mil grade high power amplifier

ZHM20-6000/10
MIL Grade High Power Amplifier
This is a medium power, super broadband RF amplifier that operates from
20 MHz to 6 GHz,
ideal for broadband military platforms as well as
commercial applications because it is robust and offers high power over
an extremely large bandwidth with decent power added efficiency.
It was
designed for broad band jamming and communication systems platforms.
It is packaged in a modular housing that is approximately 3.5" (width) by
7.5" (long) by 1.00" (height). This amplifier has a typical saturated output
power of 5-10 watts at room temperature.
Noise figure at room temperature is 10.0 dB typical.
It offers a typical gain
of 50 dB with a typical gain flatness of ± 4.0 dB. The power and gain
flatness across the band is very flat for the bandwidth. Input VSWR is
2.0:1 typical. This amplifier operates from -40C to +85C base plate
temperature.
•
Gallium Nitride Broadband Power Amplifier
•
Operation from 20 MHz to 6.0 GHz min
•
Small Signal Gain 50 dB typical
•
5-10 Watts PSat typical
Electrical Specifications
PARAMETER
MIN.
TYP.
MAX
UNITS
SYMBOL
Operating Frequency
20 6000
MHz
BW
Output Power CW
9
10
12
Watt
P
SAT
Small Signal Gain
50 54 56 dB G
1dB
Input Power for Rated P
OUT
0
5
dBm
P
IN
Switching Speed, 1kHz TTL @ P
IN
= 0dBm
1
uSec
T
ON/OFF
Small Signal Gain Flatness
±2.0
±4.0
dB
G
Third Order Intercept Point
2-Tones, 33dBm/Tone.,
= 100 KHz
+48 dBm
IP3
Input Return Loss
-10
dB
S
11
Noise Figure@ minimum attenuation
10
dB
NF
Harmonics @ Rated P
1dB
= 10W
-20
-15
dBc
H
Spurious Signals
-70
-60
dBc
Spur
Operating Voltage
26
28
32
Volt
Vdc
Current consumption
2.7
Amp
I
DC
Stock No.AMP4759
RF-LINKS - PO Box 6388, Tucson, AZ 85737 USA
Copyright © 2001-2014 RF-LINKS
28-01-2014
Tel : 323 386 4705 Fax : 775 261 8168