RF-Links Military-Grade UHF 10W Power Amplifier (800-2000 MHz) - Manual

ZHM2000M
MIL Grade High Power Amplifier
This is a high power broadband amplifier for labs or testing purposes. This
amplifier is excellent for SUHF band 800 MHz- 2000 MHz. The gain is
over 49 dB. The maximum power is 10 W. Minimum required driving
power is only 1 mW. This amplifier can be used for testing or TV
applications since the linearity is excellent.

Solid-state Class AB linear design

Compact, lightweight, rugged and reliable

Instantaneous ultra broadband

Suitable for CW, AM, and FM
(Consult factory for other modulation type)

50 ohm input/output impedance

Built-in control, monitoring and protection circuits
Electrical Specifications
PARAMETER SYMBOL MIN. TYP. MAX UNITS
Operating Frequency BW 800 2000 MHz
Output Power CW P
SAT
10 15 Watt
Output Power @ 1dB Gain Compression P
1dB
10 Watt
Input Power for Rated P
SAT
P
IN
0 dBm
Small Signal Gain Flatness 
G
SS
±1.5 dB
Power Gain @ 1dB Gain Compression G
1dB
40 42 dB
Third Order Intercept Point
2-Tones, 33dBm/Tone., 100 KHz Spacing
IP3 +51 dBm
Input Return Loss S
11
-10 dB
Noise Figure N
RF
10 dBm/MHz
Harmonics @ P
OUT
= 8W H -20 dBc
Spurious Signals Spur -70 -60 dBc
Operating Voltage Vdc 12 13 15 Volt
Current consumption I
DD
5 6 Amp
Copyright © 2001-2015 RF-LINKS