beautypg.com

RF-Links High-Power Military-Grade Microwave 80W Amplifier (9.5-11 GHz) User Manual

Export restricted item

background image

This ZHM-0911-G80 amplifier is a high power,

X band, Solid State Power that operates from 9.5 to

10.5 GHz. The saturated output power is 80 watts

typical at 25C. Typical small signal gain is 43 dB.

Noise figure is 6.5 dB typical at 25C. Input VSWR is

2.0:1 maximum. Output VSWR is 2.0:1 maximum. This

unit is equipped with DC switching circuitry that enables

and disables the DC-DC circuitry in 1000 nSec maximum.

Standard features include reverse polarity protection, output

short and open circuit protection, an over-temperature

alarm and an integrated DC-DC converter with

over/under voltage protection. This power amplifier

operates from a +28 Vdc power supply with a class

AB bias of typically 15.0 amps. This unit is also offered

as a +12Vdc amplifier in a smaller package. Please

contact the factory. This amplifier operates from -40C to

+65C base plate temperature. Maximum input power

with no damage is +20 dBm.

Typical Performance from 9 to 11 GHz @ 25 C

Parameter

Min

Typ

Max

Small Signal Gain (dB)

40

44

48

Small Signal Gain Flatness (dB) +/-1.0 +/-2.0 NA

Saturated Output Power (dBm) 47.0 49.0 50.0

P1dB (dBm)

46.0

48.0 49.5

Input Return Loss (dB)

-20.0 -14.9 -9.8

Output Return Loss (dB)

-20.0 -14.9 -9.8

Noise Figure (dB)

4.0

6.5

10.0

Supply Voltage (Vdc)

(Unit comes with a +12 Vdc

option)

27

28

29

Quiescent Current Class AB

Bias (Amps)

14.0

15.0

17.5

Harmonics (dBc)

-80

-60 -40

DC Switching On Time (nSecs)

300 400 1000

DC Switching Off Time (nSecs)

500 800 1000

This amplifier is ideal for X Band Radar and Communication Systems
that require high reliability and high power in a rugged and com-
pact module. Standard housing size is approximately 9.25 X 11.0
X 1.50 inches. This PA needs to be heat sunk properly to keep
the base plate temperature to +65C maximum. TNC female con-
nectors are standard on the RF input and output ports. DC and
command/control signals are accessible via a DC connector. This
amplifier is environmentally sealed for operation in airborne environment.

ZHM-00911-G80

HIGH POWER 9-11GHz
MIL GRADE MICROWAVE AMPLIFIER

ELECTRICAL SPECIFICATIONS

Low Frequency 9500 MHz

High Frequency 10500 MHz

Small Signal Gain 44 dBm typ

P1db

47 dBm typ

Psat

49 dBm typ

Oip

357 dBm typ

Applied Voltage

28 Vdc

Short Protection

Yes

Over Protection

Yes

Baseplate Temp -40C to 65

C

Copyright © 2001-2014 RF-LINKS.COM

• Operation across 9.5 to 10.5 GHz
• 80 watts saturated output power typ
• 43 dB typ small signal gain
• High speed DC switching circuitry
• 6.5 dB noise figure

Export restricted item