GeChic 1102I 11.6" 16:9 Portable Touchscreen LCD Monitor User Manual

Page 17

Aspect Ratio

Aspect ratio: When select "16:9 Full

Screen", the monitor displays a 16:9

image in full screen. When select 4:3, the

monitor displays a 4:3 image with left

right side black borders to fill the 16:9

screen. When select "Original", the moni-

tor displays the image in its original size.

Overscan:

only available when inputting

HDMI video signal (ex:1080P/720P).

Enabling this function allows you to cali-

brate the display area.

5. Manual Image Adjust

1) Auto Adjust: Adjust image settings automatical-

ly. Only available when inputting VGA video

signal.

2) H. Position: Move screen image to left/right.

3) V. Position: Move up/down screen image.

4) Clock: Adjust the pixel clock for horizontal

sweep. If the frequency is not correct, the screen

shows vertical stripes and the image is not pro-

portional.

5) Phase: Adjust the phase of the pixel clock signal.

With a wrong phase

adjustment, the screen shows horizontal disturb-

ances..

6. OSD menu:

1) Language Select: Change to the other language.

2) H. Position: Move the OSD menu to left/right.

3) V. Position: Move up/down the OSD menu.

4) OSD Timer(sec.): Adjust idle time before OSD

menu disappears.

5) OSD Transparency: Make the OSD menu trans-

parent to show the background.

6) Auto Power Off: Select "On" to launch this

function, when no image displayed on the

screen, the monitor will enter Stand

by mode,

and power off itself after 15 minutes.

Select "Off" to disable this function. The monitor will stay in Stand

by mode and will not

power off.

7) Power On/Off Indicator: Select "Off" to turn off the Power On/Off Indicator.

8) Power Button Lock: Select "On" to lock the Power Button.

Audio Settings: Adjust audio volume or select silent mode.

Input Source: Select Analog VGA source, HDMI1 digital video signal (from the left HDMI

port) or HDMI 2 digital video signal (from the HDMI port on Rear Dock). When no video

signal inputting to the selected input source, the monitor will detect other video signal

automatically.

Information: Show the frequency of the input image, On

Lap model, firmware ver-

sion ...etc.

1) Reset: Select "Yes" to reset to defaults.