GeChic 1102I 11.6" 16:9 Portable Touchscreen LCD Monitor - Manual (Page 16)

Hot Keys Description ：
Increase Volume/UP: Press this Button to show "Volume bar." In the OSD menu, press this
button to move up or to the left. Press and hold this button to increase the volume continu-
ously.
Decrease Volume/Down: Press this Button to show "Input Source." In the OSD menu, press
this button to move down or to the right. Press and hold this button to decrease the volume
continuously.
Menu/Select: Press the Menu Button to launch OSD panel. In OSD panel, press
this button to select and enter the next page.
Exit: In the OSD panel, press the Exit Button to exit and back to the previous
page.
Power: Press the Power Button to power on/off the Monitor.
If press both "Increase Volume/Down " and "Exit " at the same time, OSD will be reset
as the factory settings.
If press both " Increase Volume/Up " and "Decrease Volume/Down " at the same time,
you can enable "Mute" mode. Press these two buttons again to release mute mode.
Section 2 OSD Description
When turning on On - Lap monitor at the first time, the "Language Select"
menu appears on the left top. Please press " Menu/Select" button to
choose the language you like, then the "Language Select" menu won't appear
next time. If press "Exit" button to disable the "Language Select" menu, it
will appear again when powering on the monitor next time.
1. Basic Button Operation
Press button to launch the OSD panel. Press or to view the items.
Press to launch the selected item. If the selected item has sub - items, press
again to launch the sub - items, and press or to select the settings of
sub - items. To exit, press . Repeat the steps above to adjust the other
settings.
2. Display Settings
As the fig. shown, enter "Display Settings" to
adjust "Brightness", "Contrast", "Sharpness",
and the other functions.
1) ECO Mode: The maximum brightness is at
50 in Eco Mode.
2) Auto Adjust: Launch "Auto Contrast Adjust"
and "Auto Brightness Adjust" to adjust
brightness and contrast automatically to
ensure the highest quality when displaying
moving images.
3. Color Settings
1) Color Effect: In Color Effect, there are 4
modes: "Standard", "Photo", "Game", and
"Movie" offered to be selected.
2) Blue Light Reduction: Select "On" to reduc-
es the screen's blue light automatically.
3) Color Temperature: Select "Cool" to in-
crease the blue color of the image; Select
"Warm" to increase the red color of the
image. Select "User" to adjust the RGB color
settings manually.
10