GeChic 1102I 11.6" 16:9 Portable Touchscreen LCD Monitor - Manual (Page 10)

As the fig. below, rotate aside the Cover Locks firstly, and take the monitor
out. Then turn the monitor's backside to the Protective Cover:
○
1 Put the
bottom half of the monitor into the Protective Cover, and
○
2 Put the top half
of the monitor into the Protective Cover. Rotate down the Cover Locks to
prevent the monitor from sliding out.
P.S. If the monitor does not get enough power from a single USB port, it
may cause splash screen or display interruption. Please connect to the 5V -
2A adapter.
4
Section 2 Installation of Vertical Display (Only for On - Lap 1102H)
As the fig. below, rotate aside the Cover Lock firstly, and take out the moni-
tor, then turn the monitor's back side to the Protective Cover . Do keep the
connection ports on the topside.
○
1 Put the bottom half of the monitor into
the Protective Cover,
○
2 Put the top half of the monitor into the Indentation
of the Protective Cover. Rotate down the Clover Lock.
As the fig. , connect On - Lap 1102 to a laptop. On - Lap 1102 can be powered
on through two USB ports or a 5V - 2A adapter. The video input source is
"HDMI1".