Epson 24-PIN DOT MATRIX PRINTER LQ-570+ - Manual (Page 70)

If your printer is double spacing, turn DIP switch 2-4 off. If
each line overprints the next, turn DIP switch 2-4 on.
Micro Feed
The micro-feed feature allows you to move the paper forward
or
in You can use this
feature to adjust the loading and
Before you adjust the loading position, it is set to the factory
setting (8.5
mm). By moving the paper backward, you can set
the paper. You can then print more lines per page.
you make adjustments to the loading or
new even if you turn off the printer.
When you adjust the loading position of single-sheet paper, the
printer remembers the new position until you turn off the
power. The loading position returns to the factory setting
time as you the
LOAD/EJECT
or button, as
indicated on the print&s control panel. To use the
1 .
Using the Printer 3-13