Epson 24-PIN DOT MATRIX PRINTER LQ-570+ - Manual (Page 34)

Configuring Your Software for the Printer
Most software lets you specify the type of printer you use so
that you can take full advantage of the print&s features. Your
software probably provides an installation or setup section that
presents a list of printers.
Choosing from a menu
To take full advantage of your printer’s features, including
ESC/P 2,
choose the
LQ-570+/1070+ or Stylus 800/1000 from
the menu. If these printers are not listed, contact the software
manufacturer or see “Where to Get Help for United States
Users” at the beginning of this manual to see
update to
the is available. Until you receive an update, choose
from the following
ActionPrinter 5000+
ActionPrinter 5000
LQ-570/1070
LQ-870/1170
LQ-100
SQ-870/1170
LQ-510/550
LQ-500
LQ-860 / LQ-1060
LQ-850 /LQ-1050
LQ-2550
If none of these printers is listed, select the first one available
from the following LQ, FX, LX, RX, MX, Epson printer,
Standard printer,Draft printer. Because some of the printers in
this list are 9-pin printers, your graphics printing may not be
correct.
1-14
Setting Up the Printer