Choosing place for the printer, Choosing a place for the printer -3, Choosing – Epson 24-PIN DOT MATRIX PRINTER LQ-570+ User Manual
Page 23: Place for the printer
Choosing
a
Place for the Printer
When selecting a place to set up your printer, be sure to follow
the guidelines below.
Place the printer on a flat, stable surface.
Place the printer
enough to the computer for the
printer’s interface cable to reach it.
Leave adequate room around the printer to allow for easy
operation and maintenance.
subject to
sunlight, excessive
moisture, or
Use a grounded outlet do
not
use an adapter plug.
Place
the
printer
where
you can easily unplug the power
Avoid
outlets
by wall switches or
automatic
Accidental disruption of power can wipe
out information in the memory of your printer or computer.
Avoid outlets on the same circuit as large motors or other
appliances that can cause fluctuations in line voltage.
Keep the entire computer system away from
sources of
such as
loudspeakers or
units of
telephones.
If you plan to use a printer stand, follow these guidelines:
Use a stand that supports at least 16.0 kg
for the
or 22.0 kg
for the
Setting Up the Printer
1-3