Epson 24-PIN DOT MATRIX PRINTER LQ-570+ - Manual (Page 37)

Push tractor This position is for loading continuous paper from
the rear, with the tractor in the push-tractor
position.
Pull tractor This position is for loading continuous paper from
the or bottom, with the tractor in the
pull-tractor position. Use this position when
you have installed both the push tractor and
the optional pull tractor.
Using Single Sheets
Your printer can print on single of paper from 148 mm
(5.8 inches) to 257 mm (10.1 inches) wide on the and
You can load single sheets either the top or front of the
printer.
Loading single sheets from the top
1.
Move
the paper-release lever to the position.
Make sure the paper guide is in the upright position
Paper Handling 2-3