Epson 24-PIN DOT MATRIX PRINTER LQ-570+ - Manual (Page 41)

Use the on the right side of
the printer only to
printer it to the position.
If the platen turns but the printer doesn’t load the paper,
completely remove the paper and re-insert it more firmly.
To eject the paper, press the LOAD/EJECT button.
N o t e
printer’s built-in in front of the hold up to
Using Continuous Paper
You can print on continuous paper from 101 mm (4 inches) to
254 mm (10 inches) wide on the and from 101 mm (4
‘inches) to 406 mm (16 inches) wide on the
Tractor position and paper
You can feed continuous paper from the rear, front, or bottom.
Your printer comes with the tractor installed in the
push-tractor position, for feeding paper from the rear. To feed
paper from the front
pull-tractor position. You can also install an optional
Always move the paper-release lever to the position indicated
for the paper-feeding method you are using, as shown in the
table on page 2-8.
Make sure you your paper supply with the paper loaded
in the tractor so the paper feeds smoothly into the printer.
Paper Handling 2-7