Epson 24-PIN DOT MATRIX PRINTER LQ-570+ - Manual (Page 17)

Introduction
These features make your Epson printer an outstanding value:
Quiet operation. This printer makes far less noise than
previous dot-matrix printers.
Fast printing speed. You can print up to 269 characters per
second in 12-cpi draft mode.
A wide choice of scalable fonts. Four scalable fonts are
available: Epson Roman, Epson Roman T, Epson Sans Serif,
and Epson Sans Serif H.
Easy paper handling. The printer has four paper paths to
suit your printing needs: top, rear, bottom, and front.
Epson’s ESC/P 2™. This is the first dot-matrix printer
control language to offer scalable fonts and enhanced
graphics.
Compatibility. The printer supports the Epson ESC/P
®
commands widely used in application software.
Unique control-panel design. You can choose from nine
popular letterquality fonts and one draft font.
IBM
®
emulation mode (European version only). This mode
emulates IBM Proprinter X24E and XL24E.
The LQ-570+ and LQ-1070+ are basically the same printer
except for the width of their carriages. The LQ-570+
accommodates paper up to 254 mm (10 inches) wide. The
LQ-1070+ accommodates paper up to 355.6 mm (14 inches)
wide.