Emerson GXT2-PP20KRT208 - Manual (Page 16)

Installation
12
5.1.2 Mount the Liebert GXT2-PP20KRT208 on a Wall
Mounting the parallel POD on a wall requires eight field-supplied wall inserts and eight field-sup-
plied screws. The minimum size for the wall insert is 5x30 and for the screw, M5x30.
1. Secure the four fixed brackets to the rearmost screw holes on either side of the Liebert
GXT2-PP20KRT208 (see Figure 10).
2. Use the electric drill to drill the holes with suitable depth (could be the length of the wall inserts)
in the wall.
3. Put the field-supplied wall inserts into the holes.
4. Hold the parallel POD against the wall, aligned with the mounting holes and use field-supplied
screws to attach the unit to the wall (see Figure 10).
Figure 10 Mount the Liebert GXT2-PP20KRT208 on a wall