Connecting to an external computer monitor – Epson PowerLite 2250U 5000-Lumen WUXGA 3LCD Projector User Manual
Page 46
46
3.
Connect the other end to the projector's
HDBaseT
port.
Note:
See the documentation that came with the HDBaseT transmitter for instructions on connecting
it to your video device or computer.
4.
Turn on the projector and HDBaseT transmitter.
Note:
To enable communication from the Ethernet and serial ports on the transmitter, select
On
as the
Control Communications
setting in the projector's Extended menu. Turning on this setting disables the
projector's
LAN
and
RS-232C
ports. If you connected an Extron XTP transmitter or switcher to the
projector's
HDBaseT
port, select
On
as the
Extron XTP
setting in the projector's Extended menu.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Connecting to an External Computer Monitor
If you connected a computer to the projector's
Computer
port, you can also connect an external monitor
to the projector. This lets you see your presentation on the external monitor even when the projected
image is not visible.
If you want to output images to an external monitor when the projector is turned off, you need to select
Always On
as the
A/V Output
setting in the projector's Extended menu.
Note:
Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.