Solutions when the image is not rectangular – Epson PowerLite 2250U 5000-Lumen WUXGA 3LCD Projector User Manual

Page 208

208

• For VGA connections, press the

Auto

button on the remote control to optimize the image signal.

• Make sure the

Resolution

setting in the Signal menu is set correctly to for the input signal.

• Try adjusting the image position using the

Position

menu setting.

• Press the

Aspect

button on the remote control to select a different image aspect ratio.

• If you zoomed into or out of the image using the

E-Zoom

buttons, press the

Esc

button until the

projector returns to a full display.

• Check the cables connecting the computer or video source to the projector. Try connecting different

cables.

• Check your computer display settings to disable dual display and set the resolution within the

projector's limits. (See your computer manual for details.)

• Check the resolution assigned to your presentation files to see if they are created for a different

resolution than you are projecting in. (See your software help for details.)

Parent topic:

Solving Image or Sound Problems

Related references

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:

• Turn on automatic keystone adjustments using the projector's menus.

• Place the projector directly in front of the center of the screen, facing it squarely, if possible.

• If you adjusted the projector height using the projector feet, press the keystone buttons on the

projector to adjust the image shape.

• Adjust the position of the projector's horizontal keystone slider (PowerLite 2040/2140W).

• Press the

Screen Fit

button and adjust the image shape using the on-screen display (PowerLite

975W/2040/2055/2065/2140W/2155W/2165W/2245U/2250U/2255U/2265U).

• Adjust the

Quick Corner

setting to correct the image shape.

Parent topic:

Solving Image or Sound Problems

Related concepts

Image Shape