Epson PowerLite 2250U 5000-Lumen WUXGA 3LCD Projector - Manual (Page 145)

145
2. Make sure you know the projector's ID number as set in the Extended menu Projector ID setting.
Note: If you have forgotten the projector's ID, aim the remote control at the projector and press the
ID button to temporarily display the projector's ID on the screen. If you turn off the Projector ID
setting, the remote control will operate the projector regardless of the ID selected on the remote.
3. Aim the remote control at that projector.
4. Hold down the ID button on the remote control while you press the numeric button that matches the
projector's ID. Then release the buttons.
5. Press the ID button on the remote control to check if the ID-setting process worked.
You see a message displayed by the projector.
• If the remote control is listed as On , the remote control ID is set to operate only the listed projector.
• If the remote control is listed as Off , the remote control ID is not set properly. Repeat the steps
above to set the ID to match the projector you want to control.
Parent topic: Projector Identification System for Multiple Projector Control
Matching the Image Colors
You can match the display quality of multiple projectors that will project next to each other.
1. Press the Menu button.
2. Select the Extended menu and press Enter .
3. Select the Multi-Projection setting and press Enter .
4. Select the Color Matching setting and press Enter .