Epson PowerLite 2250U 5000-Lumen WUXGA 3LCD Projector User Manual
Page 178
178
Event ID code
Cause and solution
0022
Unstable screen mirroring communication. Check the network communication
status, wait a few moments, and try connecting to the network again.
0027
0028
0029
0030
0031
0035
0023
Connection failed. If you see the PIN entry screen on your computer, enter the PIN
code displayed on the Screen Mirroring standby screen or at the bottom right of the
projected image. If this does not solve the problem, restart the projector and
connected devices, then check the connection settings.
0024
0025
0041
Connection failed. Delete the recorded projector information on your computer and
try connecting again.
00432
The network software did not start. Turn the projector off and then on again.
00435
0433
Cannot display the transferred images. Restart the network software.
0434
Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
0481
0482
0485
0483
The network software quit unexpectedly. Check the network communication status,
then turn the projector off and then on again.
04FE
0484
Communication with computer was disconnected. Restart the network software.
0479
A projector system error has occurred. Turn the projector off and then on again.
04FF
0891
Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.