Epson PowerLite 2250U 5000-Lumen WUXGA 3LCD Projector - Manual (Page 146)

146
You see this screen:
Note: Press Enter to toggle between the projected image and the adjustment screen.
5. Set the Adjustment Level setting to 1 and press Enter .
6. Set the remote control ID to match the second projector.
7. Access the Extended menu Color Matching setting on the second projector and set the
Adjustment Level setting to 1 .
8. Adjust the color tone settings for Red , Green , and Blue on both projectors in the same way.
9. Adjust the Brightness setting on the projector with the darkest display so it matches the lighter
display, and press Enter . (You may need to switch the remote control ID back and forth to make
adjustments to each projector in all of these steps.)
10. Change the Adjustment Level setting to 5 on each projector, but this time match the lighter display
to the darker one.
11. Adjust the Brightness setting on Adjustment Level 2 , 3 , and 4 in the same way.
12. If you need to match more projectors, repeat these steps matching projector 3 to projector 2, 4 to 3,
and so on.
Parent topic: Projector Identification System for Multiple Projector Control