Epson PowerLite L265F 4600-Lumen Full HD Laser 3LCD Projector (Black) - Manual (Page 65)

65
1. Press the Menu button.
2. Select the Network menu and press Enter .
3. Select Network Settings and press Enter .
4. Do one of the following:
• To connect directly to a wireless device (Simple AP mode), select Passphrase , press Enter ,
and enter a passphrase from 8 to 63 characters long. When you are done, return to the Network
Settings screen, select Set , and follow the on-screen instructions to save your settings and exit
the menus. Skip the rest of these steps.
• To connect to a device via a wireless network router (infrastructure mode), select the Wireless
LAN menu and press Enter . Continue with the next step.
5. Select the Security setting and press Enter .
6. Select the security settings for your network.
7. Do one of the following according to the security you selected:
• WPA3-PSK or WPA2/WPA3-PSK : Select Passphrase , press Enter , and enter a passphrase
from 8 to 63 characters long. Then continue with step 9.