Solutions when the image is not rectangular – Epson PowerLite L265F 4600-Lumen Full HD Laser 3LCD Projector (Black) User Manual

Page 267

267

• Make sure the

Resolution

setting in the Image menu is set correctly for the input signal.

• Try adjusting the image position using the

Position

setting in the Image menu.

• Press the

Aspect

button on the remote control to select a different image aspect ratio.

• If you zoomed into or out of the image using the

E-Zoom

buttons, press the

Default

button until the

projector returns to a full display.

• Check your computer display settings to disable dual display and set the resolution within the

projector's limits. (See your computer manual for details.)

• Check the resolution assigned to your presentation files to see if they are created for a different

resolution than you are projecting in. (See your software help for details.)

• Make sure you selected the correct

Projection

setting in the Installation menu.

• If you are projecting in

Content Playback

mode, make sure you are using the correct

Overlay Effect

setting in the Operation > Content Playback menu (EB-L260F/EB-L265F).

Parent topic:

Solving Image or Sound Problems

Related references

Input Signal Settings - Signal I/O Menu
Installation Settings - Installation Menu
Image Quality Settings - Image Menu

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:

• Place the projector directly in front of the center of the screen, facing it squarely, if possible.

• Turn on automatic keystone adjustments using the projector's menus.

• If you adjusted the projector height using the projector feet, press the keystone buttons on the

projector to adjust the image shape.

• Adjust the position of the projector's horizontal keystone slider.

• Adjust the

Quick Corner

setting to correct the image shape.

• Adjust the

Arc Correction

setting to correct the image shape when projecting onto a curved surface.

• Adjust the

Point Correction

setting to correct any slight distortion.