Solutions to projector power or shut-off problems – Epson PowerLite L265F 4600-Lumen Full HD Laser 3LCD Projector (Black) User Manual

Page 273

273

Parent topic:

Solutions to Projector Power or Shut-Off Problems

If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:

• Make sure the power cord is securely connected to the projector and to a working electrical outlet.

• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to

turn on the projector.

• If the projector's laser shuts off unexpectedly, it may have entered standby mode after a period of

inactivity. Press the power button to wake the projector and adjust the

Sleep Mode

setting to change

the sleep interval.

• If the projector's laser shuts off, the Status light is flashing, and the Temp light is on, the projector has

overheated and shut off. Check the solutions for this light status.

• Make sure the

A/V Mute Timer

setting and the

Lens Cover Timer

setting are turned off in the

Operation menu.

• If the power button on the remote control does not turn on the projector, check its batteries and make

sure the

Remote Receiver

setting is turned on in the projector's menu, if available.

• The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord

and contact Epson.

• The cooling fans may run in standby status depending on the projector settings. Also, when the

projector wakes from standby status, the fans may cause an unexpected noise. This is not a
malfunction.

Parent topic:

Solving Projector or Remote Control Operation Problems

Related references

Related tasks

Unlocking the Projector's Buttons