Connecting to an external computer monitor – Epson PowerLite L265F 4600-Lumen Full HD Laser 3LCD Projector (Black) User Manual
Page 39
39
Connecting to External Speakers
Connecting a Microphone
Parent topic:
Connecting to an External Computer Monitor
If you connected a computer to the projector's
Computer1
port, you can also connect an external
monitor to the projector. This lets you see your presentation on the external monitor even when the
projected image is not visible.
To output images to an external VGA monitor, set the
Monitor Out Port
setting to
Monitor Out
in the
projector's Signal I/O menu.
If you want to output images to an external monitor when the projector is turned off, you need to select
Always On
as the
A/V Output
setting in the projector's Signal I/O menu.
Note:
Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
1.
Make sure your computer is connected to the projector's
Computer1
port.
2.
Connect the external monitor's cable to your projector's
Monitor Out/Computer 2
port.
Parent topic:
Connecting External Output Devices
Related references