Epson WorkForce DS-410 Document Scanner - Manual (Page 45)

45
1. Start Document Capture on a computer connected to the product.
2. Click the Manage Job icon from the toolbar at the top of the window.
You see a window showing the current scan job list.
3. To add a scan job, click the + icon, enter a name for the new job, select settings as necessary, and
click OK .
You can now use the new scan job when you scan with Document Capture.
Note: See the Help information in Document Capture for details.
4. To assign a scan job to the start button on your scanner, click the icon at the bottom of the
window and click Event Settings .
5. Select the job that you want to assign to the start button from the 1 drop-down list.
6. Click OK , then click OK again.
You can now use the assigned scan job when you scan with the start button on your product.
Parent topic: Starting a Scan from a Scanner Button
Starting a Scan Using the Epson Scan 2 Icon
You can start the Epson Scan 2 program to select scan settings, scan, and save the scanned image to a
file.
Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the
software described in this section. You also cannot download and install any Epson product software
from the Epson website for use with Windows 10 S; you must obtain software only from the Windows
Store.
• Windows 10: Click and select EPSON > Epson Scan 2 .
• Windows 8.x : Navigate to the Apps screen and select Epson Scan 2 .
• Windows (other versions) : Click or Start , and select All Programs or Programs . Select EPSON
> Epson Scan 2 > Epson Scan 2 .
• Mac: Open the Applications folder, open the Epson Software folder, and select Epson Scan 2 .