Scanned characters are blurry – Epson WorkForce DS-410 Document Scanner User Manual
Page 108
108
Related tasks
Scanned Characters are Blurry
If characters in your scanned images are blurry, try these solutions:
• Make sure you do not move the scanner or original while scanning.
• Operate the scanner on a flat, stable surface.
• Make sure the originals are ejecting properly.
• Adjust these Epson Scan 2 settings (if available) and try scanning again:
• Select the
Text Enhancement
setting.
• Adjust the
Threshold
setting.
• Increase the
Resolution
setting.
Parent topic:
Solving Scanned Image Quality Problems
Related references
Related tasks
Characters are not Recognized During Conversion to Editable Text (OCR)
If characters in your scanned images are not recognized during OCR conversion (Windows only), try
these solutions:
• Make sure your original is loaded straight on your product.
• Use an original with clear text.
• Adjust these Epson Scan 2 settings (if available) and try scanning again:
• Select the correct
Image Type
setting.
• Select or adjust the
Text Enhancement
setting.
• Adjust the
Threshold
setting.
• Select the correct
Text Language
setting.
• Set the scanning resolution between 200 and 600 dpi.
• If the original document is in Landscape mode, set the
Rotate
setting to
Auto
in Epson Scan 2.