Epson 4000 User Manual

Page 9

Removing an Option Card . . . . . . . . . . . . . . . . . . . . .

Removing the Option Card Connector Board . . . . . . . . . . 4-18

Replacing the Option Card Connector Board . . . . . . . . . . 4-20

Adding Video Memory . . . . . . . . . . . . . . . . . . . . . . .

Installing the Video Chips . . . . . . . . . . . . . . . . . .

Installing External Cache . . . . . . . . . . . . . . . . . . . . . .

Installing the Chips . . . . . . . . . . . . . . . . . . . . . .

Upgrading the Microprocessor . . . . . . . . . . . . . . . . . .

Replacing the Processor Chip . . . . . . . . . . . . . . . .

Installing a Heat Sink . . . . . . . . . . . . . . . . . . . . .

Post-installation Procedures . . . . . . . . . . . . . . . . . . . .

Chapter 5

Installing and Removing Drives

Installing a Hard Disk Drive in the Internal Drive Bay . . . . . 5-2

Connecting the Hard Disk Drive Cables . . . . . . . . . . 5-4

Installing the Hard Disk Below the Mounting Bracket . . 5-8

Installing the Hard Disk On the Mounting Bracket . . . . 5-10

Removing a Hard Disk Drive From the Internal Drive Bay . . . 5-13

Installing a Drivein the Upper External Drive Bay . . . . . . . 5-13

Connecting the Drive and Power Cables . . . . . . . . . . 5-16

Removing a Drive from the Upper Drive Bay . . . . . . . . . .

Reconnecting the Drive and Power Cables to the Diskette

Drive in the Lower Drive Bay . . . . . . . . . . . . . . . . . . 5-18

Chapter 6

Installing VGA and IDE Drivers

VGA Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing the Windows Drivers . . . . . . . . . . . . . . .

Configuring the Drivers . . . . . . . . . . . . . . . . . . . .

SetRES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

IDE Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

Installing the IDE Drivers . . . . . . . . . . . . . . . . . . .