Main screen of srx controller – Sony FE 70-200mm f/4 G OSS Lens User Manual
Page 6
6
[PC Port Setting]:
Allows you to change the port
number.
c
[Help] menu
Includes the following commands.
[Version]:
Displays version information for SRX
Controller.
d
Projector list
Displays a list of information on projectors that are
connected to the same network (subnet). A projector
that can be connected via either IPv4 or IPv6 will be
listed twice as separate projectors.
When you double-click a projector in the list,
connection to the projector is established and the main
screen of SRX Controller appears.
[Alert]:
Not supported.
[Model Name]:
Displays the projector’s model name.
[Serial No.]:
Displays the projector’s serial number.
[Type]:
Displays the protocol type (IPv6/IPv4) that
can be used for connection.
[IP Adress]:
Displays the projector’s IP address.
[Connection]:
Indicates the network connection
status.
“Connectable” will appear for projectors that can
be selected from SRX Controller.
[Power]:
Indicates the power status of the projector.
[Region]:
Displays the region in which the projector
is installed (only if this information is registered).
[Location]:
Displays the location in which the
projector is installed (only if this information is
registered).
[Name]:
Displays the projector’s name (only if this
information is registered).
Main Screen of SRX Controller
a
[File] menu
Includes the following commands.
[Save Log]:
Used for maintenance.
For details, contact your dealer or your local
Sony representative.
[Quit]:
Quits SRX Controller.
b
[Password] menu
Includes the following commands.
[Reset]:
Allows you to reset the password required
for authentication when displaying the
[SERVICE] and [SETTING] tabs.
This menu only appears when a user with
administrator privileges has started SRX
Controller.
[SCREEN CONTROL] block