Sony FE 70-200mm f/4 G OSS Lens - Manual (Page 16)

16
Turning Off the Projector
1
Click at the top right of the main screen of
SRX Controller.
A confirmation screen appears.
2
Click [OK].
The MAIN and LAMP indicators on the rear of the
projector will begin to blink green to indicate that
cooling is in progress. When cooling is complete, the
LAMP indicator will light red. Wait a moment.
While cooling is in progress, the POWER indicator on
the main screen of SRX Controller will also blink
green.
3
When the MAIN and LAMP indicators light red,
lower the breaker to the off position (
a ) to turn off the
main power.
Notes
Do not turn off the projector using its power switch.
Forcibly turning off the projector using the power switch
may result in insufficient cooling of the lamp, which may
in turn cause shortening of the lamp life and malfunctions.