Roland VR-4HD HD AV Mixer - Manual (Page 21)

21
You can apply effects to the main output video. The VR-4HD has 11 types of built-in effects: eight types of filter effects and four types of compositing
effects.
Using Filter Effects
These apply effects such as changes in video color tone and appearance to the entire video.
Selecting a Filter Effect
1.
Press the [SYSTEM SETUP] button to display the setup screen.
2.
Select to display the VIDEO FX menu.
3.
Select .
4.
Use the [VALUE] knob to change the effect.
Value Explanation
NEGATIVE This inverts the brightness and colors.
EMBOSS This adds a base-relief effect to the video.
COLORIZE This adds color to the video.
COLOR PASS
This produces monochrome video with a specific color
remaining.
POSTERIZE This changes the gradations in brightness.
SILHOUETTE
This separates the video into light and dark areas, makes the
dark areas black and adds a different color to the light areas.
MONOCOLOR This produces monochrome video.
FINDEDGE
This extracts contours.
OFF This assigns no effect.
5.
Press the [SYSTEM SETUP] button several times to quit the
setup screen.
Applying Filter Effects
1.
Output the video to which you want to apply an effect (p. 18).
2.
Press the [VIDEO FX/KEY LEVEL] button to display
FX>.
3.
Select , then use the [VALUE] knob to adjust the
degree of effect applied.
MEMO
5 is a shortcut for the [SYSTEM SETUP] button g
g .
4.
If you want to turn off the effect, set to “0” (zero).
MEMO
5 Using the [SYSTEM SETUP] button g g setting
PATTERN> to “OFF” also turns off the effect.
5.
Press the [VIDEO FX/KEY LEVEL] button to quit the
FX> display.
Video Effect Operations