FujiFilm X-T2 - Manual (Page 61)

39
2
F
irst St
eps
Inserting Memory Cards
Using Two Cards
The camera can be used with two cards, one in each
of its two slots. At default settings, photos are saved
to the card in the second slot only when the card in
the fi rst slot is full. This can be changed using
D SAVE
DATA SET-UP > CARD SLOT SETTING (STILL IMAGE).
Option Option Description Description Display Display
SEQUENTIAL
(default)
The card in the second slot is used only when
the card in the fi rst slot is full. If the second
slot is selected for
D SAVE DATA SET-UP >
SWITCH SLOT (SEQUENTIAL), recording
will start on the card in the second slot and
switch to the fi rst slot when the card in the
second slot is full.
BACKUP
Each picture is recorded twice, once to each
card.
RAW/JPEG
As for SEQUENTIAL, except that the RAW
copy of pictures taken with FINE + RAW or
NORMAL + RAW selected for
H IMAGE
QUALITY SETTING > IMAGE QUALITY
will be saved to the card in the fi rst slot and
the JPEG copy to the card in the second slot.
The card used to store movies can be selected using
D SAVE DATA SET-UP > MOVIE FILE DESTINATION.