FujiFilm X-T2 User Manual
Page 322
300
C
onnec
tions
11
Connecting to Computers via USB
O
If a memory card containing a large number of images is
inserted, there may be a delay before the software starts
and you may be unable to import or save images. Use a
memory card reader to transfer pictures.
The USB cable must be no more than 1.5 m (4.9 ft.) long
and be suitable for data transfer. Connect the camera
directly to the computer; do not use a USB hub or key-
board.
Make sure that the computer does not display a mes-
sage stating that copying is in progress and that the
indicator lamp is out before turning the camera off or
disconnecting the USB cable (if the number of images
copied is very large, the indicator lamp may remain lit af-
ter the message has cleared from the computer display).
Failure to observe this precaution could result in loss of
data or damage to the memory card.
Disconnect the camera before inserting or removing
memory cards.
In some cases, it may not be possible to access pictures
saved to a network server using the software in the same
way as on a standalone computer.
The user bears all applicable fees charged by the phone
company or Internet service provider when using ser-
vices that require an Internet connection.