Connect the unit to the camera – FujiFilm X-T2 User Manual
Page 287
265
P
eripherals and Optional A
c
c
essories
10
External Flash Units
Flash Settings
To adjust settings for a fl ash unit mounted on the hot
shoe or connected via the sync terminal:
1
Connect the unit to the camera.
2
In shooting mode, select FLASH
FUNCTION SETTING in the
F
(FLASH SETTING) menu tab.
The options available vary with
the fl ash unit.
Menu
Menu
Description
Description
P
P
SYNC
TERMINAL
Available with units connected via the sync
terminal and with third-party and other units
that use only the X-contact on the hot shoe.
Also displayed if no fl ash unit is connected.
SUPPLIED
FLASH
Displayed when the supplied EF-X8 fl ash unit
is mounted on the hot shoe and raised.
SHOE
MOUNT
FLASH
Displayed when an optional fl ash unit is
mounted on the hot shoe and turned on.
MASTER
(OPTICAL)
Displayed if an optional fl ash unit functioning as
a master fl ash for FUJIFILM optical wireless re-
mote fl ash control is connected and turned on.
O
SYNC TERMINAL will be also displayed if the EF-X8
is attached but not raised.
EXIT
FLASH SETTING
RED EYE REMOVAL
TTL-LOCK MODE
FLASH FUNCTION SETTING
LED LIGHT SETTING
MASTER SETTING
CH SETTING