FujiFilm X-T2 - Manual (Page 291)

269
P
eripherals and Optional A
c
c
essories
10
External Flash Units
SUPPLIED FLASH
The following options are
available with the supplied
EF-X8 shoe-mounted fl ash
unit. MODE
SUPPLIED FLASH
ADJUST END
Setting Setting Description Description
A Flash control
mode
Choose from the following options:
•
TTL: TTL mode. Adjust fl ash compensation ( B )
and choose a fl ash mode ( C ).
•
M: The fl ash fi res at the selected output ( B ) re-
gardless of subject brightness or camera settings.
Output is expressed in fractions of full power,
from ⁄ to ⁄. The desired results may not be
achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and
check the results.
•
C (COMMANDER): Choose if the fl ash is being
used to control remote synced fl ash units, for ex-
ample as part of a studio fl ash system.
•
D (OFF): The fl ash does not fi re. Flash units
connected via the sync terminal will still fi re
when the shutter is released, but can be disabled
by lowering the EF-X8 and turning the units off in
the fl ash settings menu.
B Flash compen-
sation/output Adjust fl ash level. The options available vary with
the fl ash control mode (
A ).