FujiFilm X-T2 - Manual (Page 295)

273
P
eripherals and Optional A
c
c
essories
10
External Flash Units
Setting Setting Description Description
C Flash mode
(TTL)
Choose a fl ash mode for TTL fl ash control. The op-
tions available vary with the shooting mode (P, S,
A, or M) selected.
•
E (FLASH AUTO): The fl ash fi res only as required;
fl ash level is adjusted according to subject
brightness. A
p icon displayed when the shut-
ter button is pressed halfway indicates that the
fl ash will fi re when the photo is taken.
•
F (STANDARD): The fl ash fi res with every shot if
possible; fl ash level is adjusted according to sub-
ject brightness. The fl ash will not fi re if not fully
charged when the shutter is released.
•
G (SLOW SYNC.): Combine the fl ash with slow
shutter speeds when photographing portrait
subjects against a backdrop of night scenery.
The fl ash will not fi re if not fully charged when
the shutter is released.
D Sync
Control fl ash timing.
•
H (1ST CURTAIN): The fl ash fi res immediately after
the shutter opens (generally the best choice).
•
I (2ND CURTAIN): The fl ash fi res immediately be-
fore the shutter closes.
•
R (AUTO FP(HSS)): High-speed sync (compatible units
only). The camera automatically engages front-cur-
tain high-speed sync at shutter speeds faster than
the fl ash sync speed. Equivalent to 1ST CURTAIN
when MULTI is selected for fl ash control mode.