FujiFilm X-T2 - Manual (Page 344)

322
T
echnical Not
es
12
Cleaning the Image Sensor
Dust that can not be removed using D USER
SETTING > SENSOR CLEANING can be re-
moved manually as described below.
O
Note that there will be a charge to repair or replace the
image sensor if it is damaged during cleaning.
1 Use a blower (not a brush) to
remove dust from the sensor.
O
Do not use a brush or blower
brush. Failure to observe this
precaution could damage the
sensor.
2 Check whether the dust has been successfully re-
moved. Repeat Steps 1 and 2 as necessary.
3 Replace the body cap or lens.