FujiFilm X-T2 - Manual (Page 299)

277
P
eripherals and Optional A
c
c
essories
10
External Flash Units
Setting Setting Description Description
D Flash compen-
sation/output
(group A)
Adjust fl ash level for the selected group according
to option selected for fl ash control mode. Note
that the full value may not be applied if the limits
of the fl ash control system are exceeded.
•
TTL: Adjust fl ash compensation.
•
M/MULTI: Adjust fl ash output.
•
TTL%: Choose the balance between groups A and
B and adjust overall fl ash compensation.
E Flash compen-
sation/output
(group B)
F Flash compen-
sation/output
(group C)
G Flash mode
(TTL)
Choose a fl ash mode for TTL fl ash control. The op-
tions available vary with the shooting mode (P, S,
A, or M) selected.
•
E (FLASH AUTO): The fl ash fi res only as required;
fl ash level is adjusted according to subject
brightness. A
p icon displayed when the shut-
ter button is pressed halfway indicates that the
fl ash will fi re when the photo is taken.
•
F (STANDARD): The fl ash fi res with every shot if
possible; fl ash level is adjusted according to sub-
ject brightness. The fl ash will not fi re if not fully
charged when the shutter is released.
•
G (SLOW SYNC.): Combine the fl ash with slow
shutter speeds when photographing portrait
subjects against a backdrop of night scenery.
The fl ash will not fi re if not fully charged when
the shutter is released.