Canon EOS 1300D - Manual (Page 99)

99
Establish a connection by selecting the SSID (or ESS-ID) of the access
point to connect to from a list of active access points nearby.
1
Select [Wi-Fi function].
Under the [53] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function] (p.17).
If a screen for setting a nickname (for
identification) appears, register a
nickname (p.14).
2
Select [m].
Select [m] (Upload to Web service)
and press <0>.
3
Select a Web service.
Select a Web service to connect to,
then press <0>.
The contents and ordering of the list
of items displayed will vary depending
on settings (p.91).
The Web service to connect to can be
changed when reconnecting (p.108).
X The camera’s lamp will blink.
Depending on the selected Web
service, the [Send to] screen is
displayed. Select a destination
(p.103).
Connecting to a Detected Network Manually
Selecting the Access Point