Canon EOS 1300D - Manual (Page 120)

120
Responding to Error Messages
What to check on the camera
On the camera, IP address is set to [Auto setting]. Is this the
correct setting?
X If no DHCP server is used, configure settings after setting the IP
address to [Manual setting] on the camera (p.138).
What to check on the DHCP server
Is the power of the DHCP server on?
X Turn on the DHCP server.
Are there enough addresses for assignment by the DHCP
server?
X Increase the number of addresses assigned by the DHCP server.
X Remove devices assigned addresses by the DHCP server from
the network to reduce the number of addresses in use.
Is the DHCP server working correctly?
X Check the DHCP server settings to make sure it is working
correctly as a DHCP server.
X If applicable, ask your network administrator to ensure the DHCP
server is available.
What to check on the network as a whole
Does your network include a router or similar device that
serves as a gateway?
X If applicable, ask your network administrator for the network
gateway address and enter it on the camera (p.134, 138).
X Make sure that the gateway address setting is correctly entered on
all network devices including the camera.
21: No address assigned by DHCP server