Canon EOS 1300D - Manual (Page 54)

54
The camera can reconnect to a camera for which connection settings
have been registered.
1
Select [Wi-Fi function].
Under the [53] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
2
Select [z].
Select [z] (Transfer images
between cameras) and press <0>.
3
Select [Connect].
When settings for multiple connection
destinations are registered, select
[Choose set.], select the connection
destination, then connect to the
destination.
Select [Connect] and press <0>.
On the confirmation dialog, select
[OK].
Perform the reconnection procedure
on the target camera as well.
X The images on the card are displayed
and the images to send can be
selected.
By default, settings are named after
the nickname of the target camera.
Reconnecting
If Wi-Fi settings is cleared (p.115) or the connection setting is deleted
(p.114) on the target camera, reconnection will no longer be possible. Select
[Review/change settings] and change the settings (p.112).